AIRMAR® P79 Loaded Enclosures

AIRMAR® P79 Loaded EnclosuresThis plastic in hull transducer with an adjustable deadrise angle makes installation a snap. The NMEA 2000 100 W transducer has a depth of 500 ft; an operating frequency of 235 kHz; a beamwidth of 6 degrees; and a 0 to 22 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. *Not recommended for cored hulls. Maximum fiberglass thickness should be no more than 5 8" thick.

Also available in a GNX Wired Sail Pack

9dB to 0dB

Dual "Sierra" feedback circuitry decreases distortion by correcting the output using the original input signal

for deeper bass at higher volume levels

Provides visibility in low light up to 15 meters

4" High Temperature Voice Coil with Shorting Ring

You can select the cutoff frequency with this rotary control between 5Hz and 40Hz

It puts out six channels of 50 watts RMS each to speakers with 4- to 2-ohm impedances — so it'll work equally well with factory and aftermarket speakers — plus two channels that can each produce 150 watts RMS at 4 ohms and 300 watts RMS at 2 ohms

Weight: 57

our Stealthbox® team deployed a pair of our patented thin-line technology Subwoofers and wrapped them in an optimized sealed enclosure

83 volts N/A Frequency Response 65 - 20k Hz Maximum RMS Wattage 50 Peak Power Handling (Watts) 200 Top-mount Depth (Inches) 2 9/16 Bottom-mount Depth (Inches) 2 3/4 Cutout Diameter or Length (inches) 5 9/16 Mounting Height (Inches) 0

taking extra care to ensure a clean signal path